|
What is a wheel alignment and how does it effect your vehicle?
05/22/12
I was driving to work one morning and I noticed how many potholes have cropped
up in the last few days. Temperature changes and snowplows have a tendency to
breed a whole new generation of potholes. New York City has to be the world
leader in pothole production. I have heard stories of cars being lost in some
of those potholes, never to be seen again. We swerve around them; slow down
to go over them and pray that nothing broke after hitting that last one.
Even though you didn't break anything, there can still be damage. Hitting
potholes, rubbing curbs and bumping concrete parking stops knock things in your
steering and suspension around and, eventually, things are not straight anymore.
You notice your car is pulling one way or another or it seems to fight you when
you turn or try to maintain a straight course.
Sponsored Links
OASIS Laser AlignmentOver 16,000 Optical & Laser Alignments. Visit our
site today!www.oasisalignment.com
Laser AlignmentMeasure and align in real time 0.001 inch resolution at 300
feethttp://www.on-trak.com
Wheel Balancers U.S.AGetting you the balancer you need when you need it - affordably.www.AmericasPrideOnline.com
Keeping your wheels aligned will prevent tire wear, increase fuel mileage by
reducing road friction and improve the vehicles handling. Even without abuse,
front wheel alignment will change under normal, everyday driving conditions.
The change may be so gradual that it is not noticed at first. The first sign
of something wrong usually shows up on the front tires, which develop peculiar
wear patterns that will severely shorten the life of the tire. When these appear,
the vehicle should have its alignment checked.
Chances are you need a wheel alignment. You know your car needs an alignment
every once in a while and you might even get one whenever you buy new tires.
But how many people understand what is done in an alignment? What exactly is
adjusted and why? I'm going to try and explain what is changed, what it is and
why it's important.
Let's start by understand the three main points in a wheel alignment. They
are Camber, Caster and Toe. These are the most important of the angles in the
geometry of the front end.
*
Camber:
Camber is the tilting of the wheels from the vertical when viewed from the front
of the vehicle. When the wheels tilt outward at the top, the camber is positive
(+). When the wheel tilts inward at the top, the camber is negative (-). The
amount of tilt is measured in degrees from the vertical. Camber settings influence
the directional control and the tire wear.
Too much positive camber will result in premature wear on the outside of the
tire and cause excessive wear on the suspension parts.
Too much negative camber will result in premature wear on the inside of the
tire and cause excessive wear on the suspension parts.
Unequal side-to-side camber of 1° or more will cause the vehicle to pull
or lead to the side with the most positive camber.
*
Caster:
Caster is the tilting of the uppermost point of the steering axis either forward
or backward (when viewed from the side of the vehicle). A backward tilt is positive
(+) and a forward tilt is negative (-). Caster influences directional control
of the steering but does not affect the tire wear and is not adjustable on this
vehicle. Caster is affected by the vehicle height, therefore it is important
to keep the body at its designed height. Overloading the vehicle or a weak or
sagging rear spring will affect caster.
When the rear of the vehicle is lower than its designated trim height, the
front suspension moves to a more positive caster. If the rear of the vehicle
is higher than its designated trim height, the front suspension moves to a less
positive caster. With too little positive caster, steering may be touchy at
high speed and wheel returnability may be diminished when coming out of a turn.
If one wheel has more positive caster than the other, that wheel will pull toward
the center of the vehicle. This condition will cause the vehicle to pull or
lead to the side with the least amount of positive caster.
*
Toe:
Toe is a measurement of how much the front and/or rear wheels are turned in
or out from a straight-ahead position. When the wheels are turned in, toe is
positive (+). When the wheels are turned out, toe is negative (-). The actual
amount of toe is normally only a fraction of a degree. The purpose of toe is
to ensure that the wheels roll parallel. Toe also serves to offset the small
deflections of the wheel support system that occur when the vehicle is rolling
forward. In other words, with the vehicle standing still and the wheels set
with toe-in, the wheels tend to roll parallel on the road when the vehicle is
moving. Improper toe adjustment will cause premature tire wear and cause steering
instability.
| 
